JTraffic Screensaver

M=GET;

M=GET;\
M=M10;\

Cars are removed from the end of a train. This is the exact opposite of the M=PUT; Movement.

TB = <WaitTime>; Waiting time and actions before the train enters the screen.
C = <Train>; The train from which the car(s) are removed - without the cars to remove.
C1 = <Train>; The cars to be removed from the train.
D = <Direction>; The direction of the train.
V = <Speed>; Speed which the train C, C1 appears on the screen.
B = <Deceleration>; Deceleration rate of the train C, C1 as it comes to a stop..
P = <Place>; Place on the screen where the train C, C1 stops. The middle form of the <Place> parameter means the coupling point between C and C1.
T1 = <WaitTime>; Duration of time and animations called (if any) between the halt of the original train C, C1 and the appearance of the shunting locomotive C2..
C2 = <Train>; The shunting locomotive.
V1 = <Speed>; Top speed of the shunting locomotive C2 enters the screen.
B1 = <Deceleration>; Deceleration rate of the shunting locomotive C2.
T2 = <WaitTime>; Duration of time and animations called (if any) between the time that the shunting locomotive couples to the cars to be removed and the departure of the shunting locomotive with those cars.  If C1 and C have animated side variations in the coupled state when T2 elapses, they all will be run through to their uncoupled states simultaneously. This movement has no special provision for the side variations of type " C"
A2 = <Acceleration>; Rate of acceleration with which the shunting locomotive and removed cars   C1, C2 leave the screen.
V2 = <Speed>; Top speed the shunting locomotive and removed cars C1, C2 accelerate to.
T3 = <WaitTime>; Duration of time and animations called (if any) between the departure of the shunting locomotive and the start of the train C.
A = <Acceleration>; Acceleration rate of the train C after the cars are removed.
V3 = <Speed>; Maximum speed of the shortened train C..
TE = <WaitTime>; Waiting time and actions after the train has left the screen.
W = <Row>; Simple roadbed which appears under (or in the case of catenary, also above) the train.
BG = <FgBg>; Background picture(s) shown behind the moving train.
FG = <FgBg>; Foreground picture(s) shown before the moving train.
WP = <PointList>; Waypoint(s) which determine points along the roadbed which, when passed by the train, actions can be triggered.
TX = <LineText> ; Descriptive text under the track.
TXX = <Place> ; Horizontal position of the descriptive text.
TXY = <Integer> ; Vertical position of the descriptive text.
TXC = <Color> ; Character colour of the descriptive text.
TXB = <Color> ; Background colour of the descriptive text.

Overview
The Configuration Window
Program Window
Stock List
Description Editor
Graphic Testpad
Timetable Editor
Timetable Syntax and Semanics
The timetable header
Sections, Groups, Lines, Scenes
Actions
Stock List File